Sony camera battery died while recording: your video may be in an .RSV file

Updated 13 November 2026

You were recording, the battery ran out, and when you look at the card later the clip isn't in the camera's playback, or your computer shows nothing new. It feels like the video is gone. Usually it isn't: on Sony cameras that record XAVC S or XAVC HS, the footage is very often still on the card, in a file that ends in .RSV instead of .MP4. This guide shows where to look, what to avoid and how to get a normal MP4 back. The same applies if the card was pulled out or the camera was switched off while it was still recording.

What happened to the clip

While a Sony camera records, it writes picture and sound into a working file with the .RSV extension. Only when you press stop does it add the index, the table a player needs to find each frame, and rename the file to .MP4. A dead battery cuts the power before that last step. What is left is a file with all the recorded data and no index, so neither the camera nor your computer can play it. More detail: What is an RSV file?

Where to find the file

Put the card into a card reader on your computer and open PRIVATE/M4ROOT/CLIP. Next to the finished clips (C0041.MP4, C0043.MP4 and so on) look for a file with the same kind of name and the .RSV extension, such as C0042.RSV. Check its size:

  • About the size you'd expect for the time you recorded (a few minutes of 4K runs into gigabytes): the footage was written, and the file can usually be rebuilt.
  • 0 KB or a few kilobytes: the camera stopped before it wrote anything useful. No tool can bring back what isn't there.
  • No .RSV at all: first check whether a new .MP4 with the next number is there and plays. If the card has already been back in the camera, it may have repaired the clip itself. If there is no file for that take at all, it may have been deleted or the card formatted. That needs data recovery software first; see the limits further down.

If your camera has two card slots and was set to record to both at once, check the second card too, and copy both. After a dead battery, both cards usually hold an .RSV; if only one card was pulled out, the other may hold a finished .MP4 of the same take.

What not to do

Until the file is copied, every new write to the card is a chance to overwrite the space your recording sits in.

  • Don't format the card, even if the camera asks you to.
  • Don't keep recording on that card. Put in another card and carry on.
  • Don't delete the .RSV because it looks broken. It is the only copy of that take.
  • Don't rename it to .MP4 or run it through a video converter. The name changes, the missing index doesn't, and a converter can't read the file either: why converting doesn't work.

The free steps first

  1. Copy the whole PRIVATE folder from the card to a drive on your computer, healthy clips included, and work only on that copy.
  2. Try the camera. Some Sony cameras try to recover an interrupted clip on their own when you put the card back into the same camera with a charged battery. It doesn't happen with every model or every interruption, but with the card already copied it costs nothing. If a message about recovering data appears, let it run to the end without switching off, then look for a new .MP4.
  3. Free repair methods with a reference clip. Some free methods rebuild the index using a healthy clip from the same camera, recorded with the same settings, as a pattern. When they work, they cost nothing; when they fail, a common reason is the pattern: RSV repair without a reference file.

Rebuild the video as an MP4 on Windows

If the .RSV is still there after that, it needs a new index. Lazaclip is our Windows 10/11 program for this (we make it, so take this section as coming from the seller). It works offline, doesn't upload your footage and never changes the original file:

  1. Open the card or the folder you copied. The program lists every .RSV it finds and checks whether each one can be read.
  2. Click Preview 10 s to watch the first ten seconds of the clip with a watermark. The scan and the preview are free.
  3. With a license, save the full clip as an .MP4 on your PC, or repair every .RSV in the folder in one go.

Picture and sound are copied as recorded, without re-encoding; only the index is new. We tested A7S III recordings (XAVC S, XAVC S-I and XAVC HS, rebuilt without a reference clip) and the original a7S with a reference clip. Other Sony cameras that record XAVC S or XAVC HS, such as the FX3, FX30, A7 IV or ZV-E10 II, haven't been tested yet; the free preview shows whether the program can read your file before you pay. Guides for your camera: FX3, FX30, A7S III, A7 IV, A6700, ZV-E10 II.

What a rebuild can't bring back

  • The last second or so before the battery died. The camera writes video in small groups of frames, and the group it was in the middle of was never completely written.
  • Deleted files or a formatted card. If the .RSV is gone, you need data recovery software to get the file back first; rebuilding the index comes after that.
  • Overwritten data. If the card was used again after the cut, part of the file may be gone for good.
  • Other formats. MXF and X-OCN files from Sony cinema cameras, and recordings from other brands, break in different ways; this guide and our program don't cover them.

So the battery doesn't cost you a take again

  • Start long takes on a full battery and keep a charged spare at hand. Batteries drain much faster in the cold.
  • For interviews, events and long takes, consider external power, if your camera supports it (check its manual).
  • Swap batteries between takes, not in the middle of one, and stop recording before you open the battery or card door.
  • On cameras with two slots, record to both at once: it protects you from a pulled or failed card, not from a dead battery.