Sony HXR-NX800 RSV file: getting back a clip that was cut off
Updated 14 November 2026
The HXR-NX800 stopped in the middle of a clip: the battery or the external power gave out, the camcorder
was switched off by accident, or a card came out too early. On the card there is now a file ending in
.RSV instead of the .MP4 you expected, and your editor won't open it. This guide
explains what happened and how to get the clip back, step by step.
What happened to the file
While the NX800 records an MP4 clip, it writes the picture and sound into a working file with the
.RSV extension. When you press stop, the camcorder adds the index (the table that says where
every frame and every piece of audio sits in the file) and renames the file to .MP4. If the
power goes before that, the index is never written. The recording itself is in the file, but players and
editors can't find their way through it. More background:
What is an RSV file?
The NX800 records only MP4 files: XAVC HS (H.265), XAVC S and
XAVC S-I (H.264), and that is the case this guide covers. Unlike its sibling, the PXW-Z200,
it has no MXF mode, so every clip on the card sits in an M4ROOT folder. Shooting with a Z200?
See Sony PXW-Z200 RSV file.
Before anything else: protect the card
- Don't format the card, in the camcorder or on a computer, even if the camcorder suggests it.
- Don't record the next clip on that card. New recordings can land on the space the interrupted clip occupies.
- Don't delete the .RSV, however strange the file looks.
- Copy the whole PRIVATE folder to a computer first. Put the card in a card reader and
copy it. On an SD card the video files are in
PRIVATE/M4ROOT/CLIP. On a CFexpress Type A card theM4ROOTfolder can sit at the top of the card instead, so the simplest safe choice is to copy everything on the card. A copy means you can try things without risking the only original.
Check the other slot
The NX800 has two card slots, and each takes a CFexpress Type A or an SD card. If it was set to record to
both cards at the same time and only one card was pulled out, the other card may hold a finished
.MP4 of the same clip, so check it before you repair anything. If the battery died, both cards
normally hold an .RSV; copy both.
If the second slot was only used for overflow, the clip is on the card that was active at the moment of the cut.
The free first try: the camera itself
Some Sony cameras try to recover an interrupted clip on their own when you put the card back into the same camera with a charged battery. We can't tell in advance whether your NX800 will do it for your clip, and it doesn't always happen, but it costs nothing. After you have copied the card:
- Charge the battery, or connect reliable power.
- Put the card back into the same NX800, in the same slot, and switch it on.
- If a message about recovering or repairing data appears, let it finish and don't switch off.
- Check the
CLIPfolder (PRIVATE/M4ROOT/CLIPon an SD card) on a computer again for a new.MP4.
There are also free repair methods that use a healthy clip from the same camcorder and the same settings as a pattern. Why they sometimes fail: RSV repair without a reference file.
Rebuild the clip as an MP4 on Windows
If the .RSV is still there, it needs a new index. Lazaclip is our program
for exactly this (we make it, so this is our own product being described here). It runs on Windows 10/11,
works offline and doesn't upload your footage:
- Open the card or the folder you copied. The program lists every
.RSVand says whether it can be rebuilt. - Click Preview 10 s to see the first ten seconds of your clip, watermarked, in your video player. Scanning and the preview are free.
- With a license, save the full clip as an
.MP4on your PC, or rebuild every.RSVon the card in one go.
Nothing is re-encoded: the program keeps the recorded video and audio as they are and only writes the
missing index around them. The original .RSV is never changed.
Has it been tested with the NX800?
No, not yet. Our tests so far use A7S III recordings (XAVC S, XAVC S-I and XAVC HS, rebuilt without a reference clip, with frames and audio identical to the original up to the last unfinished group of frames) and the original a7S. The NX800 uses the same XAVC S / XAVC HS recording format as those cameras. We haven't had NX800 files in our tests yet. One difference is known in advance: the NX800 records sound as 24-bit, 4-channel LPCM, a sound format we haven't yet checked on a real recording, and proxy recording is untested too. Listen to the sound in the preview: the free preview shows whether the program can read your file before you pay.
What you get back
- The clip up to the last second or so before the cut. That final moment was never completely written and can't be rebuilt.
- The sound as the camcorder recorded it, from the built-in microphone or the inputs you used. Check it in the preview first: the NX800's 4-channel sound hasn't been tested yet.
- An
.MP4roughly the size of the.RSV: save it to a drive with enough free space, not back onto the card. - The picture keeps the look you recorded with (S-Cinetone, HLG or another scene file), exactly like your other clips. XAVC HS needs an editor with H.265 support.
Avoiding it on the next job
- Long event and news days drain batteries faster than you expect. Change batteries between clips, not when the warning appears, or run the camcorder from external power that can't be knocked loose.
- Recording to both slots at once costs a second card but protects you from a pulled or failed card. It doesn't protect you from a dead battery.
- Wait until the camcorder has stopped writing before you switch it off or open the card door.
- Keep a spare card in the bag, so a card with an
.RSVon it can be put aside untouched.
Shooting weddings or events with the NX800? See RSV files from wedding and event shoots. Battery died and you're not sure what you're looking at? See Sony camera battery died while recording.