Sony FX2 RSV file: getting back a take that was cut off
Updated 13 November 2026
The FX2 stopped in the middle of a take: the battery or the external power gave out, the camera was
switched off by accident, or a card came out too early. On the card there is now a file ending in
.RSV instead of the .MP4 you expected, and your editor won't open it. This guide
explains what happened and how to get the take back, step by step.
What happened to the file
While the FX2 records, it writes the picture and sound into a working file with the .RSV
extension. When you press stop, the camera adds the index (the table that says where every frame and every
piece of audio sits in the file) and renames the file to .MP4. If the power goes before that,
the index is never written. The recording itself is in the file, but players and editors can't find their
way through it. More background: What is an RSV file?
The FX2 records XAVC S and XAVC S-I (H.264) and XAVC HS
(H.265) into .MP4 files, so an interrupted take in any of these formats ends up as an
.RSV.
Before anything else: protect the card
- Don't format the card, in the camera or on a computer, even if the camera suggests it.
- Don't record the next take on that card. New recordings can land on the space the interrupted take occupies.
- Don't delete the .RSV, however strange the file looks.
- Copy the whole PRIVATE folder to a computer first. Put the card in a card reader and
copy it. The video files are in
PRIVATE/M4ROOT/CLIP; a copy means you can try things without risking the only original.
Check the other slot
The FX2 has two card slots: slot 1 takes CFexpress Type A or SD cards, slot 2 takes SD cards. If it was
set to record to both cards at the same time and only one card was pulled out, the other card may hold a
finished .MP4 of the same take, so check it before you repair anything. If the battery died,
both cards normally hold an .RSV; copy both.
If the second slot was only used for overflow, the take is on the card that was active at the moment of the cut.
The free first try: the camera itself
Some Sony cameras try to recover an interrupted clip on their own when you put the card back into the same camera with a charged battery. We can't tell in advance whether your FX2 will do it for your take, and it doesn't always happen, but it costs nothing. After you have copied the card:
- Charge the battery, or connect reliable power.
- Put the card back into the same FX2, in the same slot, and switch it on.
- If a message about recovering or repairing data appears, let it finish and don't switch off.
- Check
PRIVATE/M4ROOT/CLIPon a computer again for a new.MP4.
There are also free repair methods that use a healthy clip from the same camera and the same settings as a pattern. Why they sometimes fail: RSV repair without a reference file.
Rebuild the take as an MP4 on Windows
If the .RSV is still there, it needs a new index. Lazaclip is our program
for exactly this (we make it, so this is our own product being described here). It runs on Windows 10/11,
works offline and doesn't upload your footage:
- Open the card or the folder you copied. The program lists every
.RSVand says whether it can be rebuilt. - Click Preview 10 s to see the first ten seconds of your take, watermarked, in your video player. Scanning and the preview are free.
- With a license, save the full take as an
.MP4on your PC, or rebuild every.RSVon the card in one go.
Nothing is re-encoded: the program keeps the recorded video and audio as they are and only writes the
missing index around them. The original .RSV is never changed.
Has it been tested with the FX2?
No, not yet. Our tests so far use A7S III recordings (XAVC S, XAVC S-I and XAVC HS, rebuilt without a reference clip, with frames and audio identical to the original up to the last unfinished group of frames) and the original a7S. The FX2 uses the same XAVC S / XAVC HS recording format as those cameras. We haven't had FX2 files in our tests yet; the free preview shows whether the program can read your file before you pay.
What you get back
- The take up to the last second or so before the cut. That final moment was never completely written and can't be rebuilt.
- The sound as the camera recorded it, from the built-in microphone or the inputs you used.
- An
.MP4roughly the size of the.RSV: save it to a drive with enough free space, not back onto the card. - S-Log3 footage still looks flat until you grade it, exactly like your other clips. XAVC HS needs an editor with H.265 support.
Avoiding it on the next job
- Long event takes drain batteries faster than you expect. Change batteries between takes, not when the warning appears, or run the camera from external power that can't be knocked loose.
- Recording to both slots at once costs a second card but protects you from a pulled or failed card. It doesn't protect you from a dead battery.
- Wait until the camera has stopped writing before you switch it off or open the card door.
- Keep a spare card in the bag, so a card with an
.RSVon it can be put aside untouched.
Shooting with an FX3 or FX30 as well? See the FX3 guide and the FX30 guide.