Sony PXW-Z200 RSV file: getting back a clip that was cut off
Updated 13 November 2026
The PXW-Z200 stopped in the middle of a clip: the battery or the external power gave out, the camcorder
was switched off by accident, or a card came out too early. On the card there is now a file ending in
.RSV instead of the .MP4 you expected, and your editor won't open it. This guide
explains what happened and how to get the clip back, step by step.
What happened to the file
While the Z200 records an MP4 clip, it writes the picture and sound into a working file with the
.RSV extension. When you press stop, the camcorder adds the index (the table that says where
every frame and every piece of audio sits in the file) and renames the file to .MP4. If the
power goes before that, the index is never written. The recording itself is in the file, but players and
editors can't find their way through it. More background:
What is an RSV file?
The Z200 can record in two file formats. In MP4 it records XAVC HS
(H.265), XAVC S and XAVC S-I (H.264) as .MP4 files, and that is the
case this guide covers. In MXF it records XAVC Long, XAVC Intra and MPEG HD 422; those
files break in a different way, and this guide and our program don't cover them. If you're not sure which
one you used, look at the card: MP4 clips sit in an M4ROOT folder, MXF clips in an
XDROOT folder.
Before anything else: protect the card
- Don't format the card, in the camcorder or on a computer, even if the camcorder suggests it.
- Don't record the next clip on that card. New recordings can land on the space the interrupted clip occupies.
- Don't delete the .RSV, however strange the file looks.
- Copy the whole PRIVATE folder to a computer first. Put the card in a card reader and
copy it. On an SD card the video files are in
PRIVATE/M4ROOT/CLIP. On a CFexpress Type A card theM4ROOTfolder can sit at the top of the card instead, so the simplest safe choice is to copy everything on the card. A copy means you can try things without risking the only original.
Check the other slot
The Z200 has two card slots, and each takes a CFexpress Type A or an SD card. If it was set to record to
both cards at the same time and only one card was pulled out, the other card may hold a finished
.MP4 of the same clip, so check it before you repair anything. If the battery died, both cards
normally hold an .RSV; copy both.
If the second slot was only used for overflow, the clip is on the card that was active at the moment of the cut.
The free first try: the camera itself
Some Sony cameras try to recover an interrupted clip on their own when you put the card back into the same camera with a charged battery. We can't tell in advance whether your Z200 will do it for your clip, and it doesn't always happen, but it costs nothing. After you have copied the card:
- Charge the battery, or connect reliable power.
- Put the card back into the same Z200, in the same slot, and switch it on.
- If a message about recovering or repairing data appears, let it finish and don't switch off.
- Check the
CLIPfolder (PRIVATE/M4ROOT/CLIPon an SD card) on a computer again for a new.MP4.
There are also free repair methods that use a healthy clip from the same camcorder and the same settings as a pattern. Why they sometimes fail: RSV repair without a reference file.
Rebuild the clip as an MP4 on Windows
If the .RSV is still there, it needs a new index. Lazaclip is our program
for exactly this (we make it, so this is our own product being described here). It runs on Windows 10/11,
works offline and doesn't upload your footage:
- Open the card or the folder you copied. The program lists every
.RSVand says whether it can be rebuilt. - Click Preview 10 s to see the first ten seconds of your clip, watermarked, in your video player. Scanning and the preview are free.
- With a license, save the full clip as an
.MP4on your PC, or rebuild every.RSVon the card in one go.
Nothing is re-encoded: the program keeps the recorded video and audio as they are and only writes the
missing index around them. The original .RSV is never changed.
Has it been tested with the Z200?
No, not yet. Our tests so far use A7S III recordings (XAVC S, XAVC S-I and XAVC HS, rebuilt without a reference clip, with frames and audio identical to the original up to the last unfinished group of frames) and the original a7S. In MP4 mode the Z200 uses the same XAVC S / XAVC HS recording format as those cameras. We haven't had Z200 files in our tests yet. One difference is known in advance: the Z200 records sound as 24-bit, 4-channel LPCM, a sound format we haven't yet checked on a real recording, and proxy recording is untested too. Listen to the sound in the preview: the free preview shows whether the program can read your file before you pay.
What you get back
- The clip up to the last second or so before the cut. That final moment was never completely written and can't be rebuilt.
- The sound as the camcorder recorded it, from the built-in microphone or the inputs you used. Check it in the preview first: the Z200's 4-channel sound hasn't been tested yet.
- An
.MP4roughly the size of the.RSV: save it to a drive with enough free space, not back onto the card. - S-Log3 footage still looks flat until you grade it, exactly like your other clips. XAVC HS needs an editor with H.265 support.
Avoiding it on the next job
- Long event and news days drain batteries faster than you expect. Change batteries between clips, not when the warning appears, or run the camcorder from external power that can't be knocked loose.
- Recording to both slots at once costs a second card but protects you from a pulled or failed card. It doesn't protect you from a dead battery.
- Wait until the camcorder has stopped writing before you switch it off or open the card door.
- Keep a spare card in the bag, so a card with an
.RSVon it can be put aside untouched.
Shooting weddings or events with the Z200? See RSV files from wedding and event shoots. Battery died and you're not sure what you're looking at? See Sony camera battery died while recording.